1. Running-in wear: This is the most common normal wear and tear of chicken manure organic fertilizer equipment. When the friction between the new friction surfaces starts, the wear speed is faster. After reaching a certain level, the actual contact area between the friction surfaces increases, the unit pressure decreases accordingly, and the wear speed also decreases.
2. Grinding wear: the wear surface is damaged by the cutting of hard particles.
3. Glue welding wear: when a certain material of the friction surface is too light, the contact pressure is too large, the lubrication conditions are too poor or the temperature is too high, etc.
4. Fatigue wear: This occurs more on the friction surface with rolling friction, which is manifested in the occurrence of cracks on the friction surface of the parts, which causes the metal surface to fall off. The main reason is that the contact pressure of the surface material exceeds the compression resistance due to compression, elongation and cold and heat. Ultimate strength.
5. Corrosion and wear: The friction surface is oxidized and deteriorated due to the continuous penetration of water vapor, chemical gas or oxide and other media between the friction surfaces. Generally, it is oxidative wear and chemical corrosion wear.
6. One of the factors that is relatively easy to cause the wear of dust from the processing machine for making chook litter fertilizer. The organic fertilizer equipment will actually generate a certain amount of dust during operation and after discharging. If it is not cleaned and maintained in time, the dust will enter the various connections in the equipment, and accumulate over time, more and more. Too much, the friction at the connection of the equipment will be greater, and it will even cause the accumulation of germs, which will cause certain corrosion to the equipment and affect the performance of the equipment. Therefore, we require the staff to do a comprehensive inspection and maintenance of the equipment in addition to the use of organic fertilizer equipment.
7. During the operation of the chicken waste fertilizer machine, our staff also need to pay attention to the lubrication degree of the equipment connection. The long-term use of the equipment is a severe test for equipment lubrication. Once a jam occurs, the friction of the equipment will increase. Only with high lubricity will it provide good power support for the operation of the organic fertilizer equipment, and the staff should develop a good habit of regularly cleaning and maintaining the equipment.
8. In addition, we need to pay special attention to the friction of the motor, otherwise it will affect the use effect of the organic fertilizer equipment, and the staff need to pay attention to check the operation of the motor at all times. Especially before the load is running, the wiring of the motor should be checked, and if it is damaged, it should be updated immediately to ensure safe operation.
When you have any interest of our chook dung processing machine, you can visit the following link,
https://www.fertilizerfactorymachine.com/chicken-manure-processing-equipment/