- Do well the run-in test run of new engine or overhauled engine. According to the manufacturer’s technical requirements and test specifications, do a good job of running-in test, through testing and adjustment. Thus smooth and hard bearing surface and suitable fit clearance can be obtained, which provides good basic conditions for bearing load and fit parts’ service life. When after the test run of rotary pelleting machine, also should be based on the technical state of the machinery necessary technical maintenance.
- Use qualified oil and water to add the internal of rotary type granulator. Bi of fuel oil and lubricating oil used by tractors and engines shall meet the prescribed quality standards, and appropriate oil brands shall be selected according to different seasons, regions and engine speed ranges.
- Cooling water should be soft water with low content of calcium and magnesium minerals. The easy way to soften hard water is to precipitate it after boiling. (organic fertilizer production line) in general production practice. Every 1000 hours of engine operation, BI must wash the scale of the cooling system to improve the heat dissipation performance of the engine.
- Ensure proper water tank and oil pressure. The cooling water temperature is generally between 70℃ and 90℃, and the normal water temperature should be kept between 80℃ and 90℃. Water temperature is too low, it is difficult to start, fuel can not be fully burned, engine power decreases, carbon accumulation increases.
- The water temperature is too high, some parts of rotary making granules machine are easy to expand and deformation, and even the occurrence of cylinder liner piston stuck and burning tile accidents, but also make the lubricating oil thin, bearing oil film strength is low, wear and tear is accelerated, but also may reduce the fresh air volume. Engine power drops. To ensure that there is a normal oil pressure, that is, ensure that 2 ~ 3kgf/cm2. Oil pressure is too high, easy to leak oil, resulting in poor lubrication.
- The oil pressure is too low, indicating that the oil supply is insufficient, the lubrication is not reliable, the wear is accelerated, and even causes the burning tile accident. When found that water temperature and oil pressure of drum granulating equipment is not normal, should be based on the relevant reasons, timely elimination.
- The maintenance rules should be carried out carefully. According to the spirit of prevention first and prevention is more important than treatment, keep on the principle of, regularly to clean, fastening, tractors, motor inspection, lubrication, adjustment and change some of the oxidative damage of rubber, plastic parts and wear parts, on time, according to the requirements for technical maintenance, to ensure the normal function of each part, effective and reliable.
The following link can help you to know more information of our machine, please click it.
https://www.fertilizerfactorymachine.com/rotary-drum-granulator/